Panasonic DBS 576 Guía Del Usuario
2. Setting Up Your Phone
576-50-750
DBS 576 issued September 2001
39
To set the Exception Day Modes using either a large-
display or small-display phone:
To set the Mode Schedule using either a large-display or
small-display phone:
1. Enter “User Maintenance” by pressing:
ON/OFF PROG * * CONF
2. Enter:
07
, press
HOLD
, enter:
2
, and press
HOLD
HOLD
.
3. Enter:
Start Date by Month - two characters and Day - two
characters
for Exception Period 1 and press
HOLD
to store the entry.
Note: To clear an entry or existing data, press the FLASH key.
4. To set additional Exception Day modes, press the
VOLUME
up or down
arrow or
HOLD
to move to the desired mode.
5. Repeat steps 4-5 until the remaining days in the month are set.
6. Press
AUTO PROG
to return to “81-User Maintenance” (step 1 above).
OR...
Press
AUTO ON/OFF
to exit User Maintenance.
1. Enter “User Maintenance” by pressing:
ON/OFF PROG * * CONF
2. Enter:
07
, and press
HOLD HOLD
HOLD
.
3. Enter:
Start Time in Hours (two characters) and Minutes
(two characters)
for Pattern 1 - first mode and press
HOLD
.
Notes: To clear an entry or existing data, press the FLASH key.
4. Enter:
Desired Mode for Pattern 1 - first (0 - None, 1 - Day 1,
2 - Day 2, 3 - Night, 4 - Night 1, 5 - Night 2
) and press
HOLD
to
store the entry.
Note: To clear an entry or existing data, press the FLASH key.
5. To set additional mode schedules, press the
VOLUME
up or down arrow or
HOLD
to move to the desired mode.
6. Repeat steps 3-5 until all patterns and modes are set. (There are 3 total patterns
with 5 start time/modes each.)
Note: Entry Positions are listed in Chapter 4 of Section 700 - Feature Operations.
7. Press
AUTO PROG
to return to “81-User Maintenance” (step 1 above).
OR...
Press
AUTO ON/OFF
to exit User Maintenance.