Panasonic DBS 576 Guía Del Usuario
2. Setting Up Your Phone
40
DBS 576 issued September 2001
576-50-750
To set the Special Day Modes using either a large-display
or small-display phone:
To set the Message Key ID code using either a large-
display or small-display phone:
1. Enter “User Maintenance” by pressing:
ON/OFF PROG * * CONF
2. Enter:
07
, press
HOLD
, enter:
1
, and press
HOLD
HOLD
.
3. Enter:
Start Time in Hours - 2 characters, and Minutes - 2
characters
for the Special Day 1 mode and press
HOLD
to store the
entry.
Note: To clear an entry or existing data, press the FLASH key.
4. Enter:
Desired mode for Special Day: 0 - None, 1 - Day 1, 2
- Day 2, 3 - Night, 4 Night 1, 5 - Night 2
and press
HOLD
to store
the entry.
Note: To clear an entry or existing data, press the FLASH key
5. To set additional Special Day modes, press the
VOLUME
up or down arrow
or
HOLD
to move to the desired mode.
6. Repeat steps 3-5 until all Special Day modes are set. (Up to 20 Special Days
may be entered.).
Note: The entry positions are listed in Chapter 4 of Section 700 - Feature Operations.
7. Press
AUTO PROG
to return to “81-User Maintenance” (step 1 above).
OR...
Press
AUTO ON/OFF
to exit User Maintenance.
1. Enter “User Maintenance” by pressing:
ON/OFF PROG * * CONF
2. Enter:
06
and press
HOLD
HOLD
.
3. Dial the
Extension Number of the Phone Being
Programmed
and press
HOLD
.
4. Enter:
Message Key ID Code
and press
HOLD
to store the entry.
Note: The ID code may contain up to 16 digits and contain 0, 1-9, *, #, pause (REDIAL
key).
• To clear an entry or existing data, press the FLASH key.
key).
• To clear an entry or existing data, press the FLASH key.
Message Key