3com 812 Manual De Usuario

Sets the system date, and leaves the time unchanged. Use show date to see what 
the current settings are. The format is: dd-mmm-yyyy. The month should be the 
first three characters of the month name. The year can be either 2 or 4 digits (97 
or 1997).

Sets the DHCP mode for the unit.

Defines the address and characteristics of the primary DHCP Server over the WAN 
that should receive our relayed DHCP requests.

Defines the address and characteristics of the secondary DHCP Server over the 
WAN that should receive our relayed DHCP requests.

prompt <string>

Sets the global command prompt for the CLI. Use show command 
to see the currently defined prompt. Limit: 64 characters.

local_prompt <string>

Sets a separate prompt for a command file process. Limit: 64 
characters.

mode

DHCP functionality you wish to enable for this unit. Currently available 
services are: 

DISABLED - disables all DHCP services.

RELAY - enables the DHCP Relay service.

SERVER - enables the DHCP Server within the unit.

address

IP address of the primary DHCP server over the WAN port where DHCP 
resolution requests should be forwarded.

enabled

Whether or not this server is active for relay.

max_hops

maximum number of hops the redirected requests are allowed to accrue 
without the request being dropped.

address

IP address of the secondary DHCP server over the WAN port where DHCP 
resolution requests should be forwarded.

enabled

Whether or not this server is active for relay.

max_hops

maximum number of hops the redirected requests are allowed to accrue 
without the request being dropped.