3com 812 Manual De Usuario
CLI Commands
B-27
set facility
<facility_name>
loglevel [level]
Sets the severity reporting level for a facility. The hosts that will receive the error
log entries are defined using add syslog loglevel. Use list facilities to see what the
current loglevel is for each facility. The levels:
log entries are defined using add syslog loglevel. Use list facilities to see what the
current loglevel is for each facility. The levels:
CRITICAL - a serious system error, which may effect system integrity
UNUSUAL - an abnormal event, which the system should recover from
COMMON - a regularly occurring event that is not frequent
VERBOSE - a regular periodic event, e.g. a routing update message
DEBUG - for debugging purposes only
set ilmi vpi <number>
vci <number>
This allows modification of the Virtual Path or Channel ID that will be used for
exchanging ILMI (Integrated Local Management Interface) messages.
exchanging ILMI (Integrated Local Management Interface) messages.
set interface
<interface_name>
filter_access [ON | OFF]
input_filter <filter_name>
output_filter <filter_name>
Sets filter parameters for the specified protocol on the specified interface. You can
see the available filter files using list filters, view the contents of a filter file using
show filter, and add filter files to FLASH memory using TFTP.
see the available filter files using list filters, view the contents of a filter file using
show filter, and add filter files to FLASH memory using TFTP.
set ip network <name>
broadcast_algorithm [number]
reassembly_maximum_size [number]
rip_authentication [string]
rip_policies_update <rip_policies>
routing_protocol [NONE | RIPV1 | RIPV2]
timeout
Number of seconds to wait before deciding a request to a Name Server has
timed out. Minimum interval and default is 5 seconds, maximum interval is
120 seconds.
timed out. Minimum interval and default is 5 seconds, maximum interval is
120 seconds.
Parameter
Description
vpi
The virtual path identifier for the ILMI.
vci
The virtual channel identifier for the ILMI.
Parameter
Description
<interface_name> Designation of interface you are setting parameters for. Limit of 32
characters.
filter_access
ON causes filters specified for an interface with a set interface command,
to override filters specified with a set user command, when the filters are
of the same type.
to override filters specified with a set user command, when the filters are
of the same type.
input_filter
Name of filter file you wish to be applied to the input stream coming in on
the specified interface. Limit: 20 characters.
the specified interface. Limit: 20 characters.
output_filter
Name of the filter file you wish to be applied to the output stream leaving
the specified interface. Limit: 20 characters.
the specified interface. Limit: 20 characters.