3com 4200G PWR Guía De Referencia
3Com Switch 4200G Family
35
Command Reference
snmp-agent mib-view
Use the
snmp-agent mib-view
command to create or update the view information, limiting the MIB objects
to be accessed by the NMS.
System view
snmp-agent packet max-size
Use the
snmp-agent packet max-size
command to set the maximum size of SNMP packet that the Agent
can send/receive.
System view
snmp-agent sys-info
Use the
snmp-agent sys-info
command to configure system information such as geographical location of
the device, contact information for system maintenance and version information of running SNMP.
System view
snmp-agent target-host
Use the
snmp-agent target-host
command to command to configure destination of SNMP Trap packets.
System view
snmp-agent trap enable
Use the
snmp-agent trap enable
command to enable the device to send Trap packets.
System view
snmp-agent trap life
Use the
snmp-agent trap life
command to set aging time for Trap packets.
System view
snmp-agent trap queue-size
Use the
snmp-agent trap queue-size
command to configure the information queue length of a Trap packet
sent to the destination host.
System view
snmp-agent trap source
Use the
snmp-agent trap source
command to configure the source address for sending Trap messages.
System view
snmp-agent usm-user
Use the
snmp-agent usm-user
command to add a new community name or, if you use the V3 parameter,
a new user to an SNMP group.
System view
snmp-agent usm-user
Use the
snmp-agent usm-user
command to add a new user to an SNMP group. You can also optionally
use this command to apply an ACL to filter network management users.
System view
snmp-agent usm-user
Use the
snmp-agent usm-user
command to add a new user to an SNMP group.
System view
snmp-agent usm-user
Use the
snmp-agent usm-user
command to add a new community name or, if you use the V3 parameter,
a new user to an SNMP group.
System view
snmp-host
Use the
snmp-host
command to configure an SNMP host for the member devices inside a cluster on the
management device.
Cluster view
speed
Use the
speed
command to set the transmission speed of the user interface.
User Interface view
speed
Use the
speed
command to configure the port rate.
Ethernet Port view
ssh client assign rsa-key
Use the
ssh client assign rsa-key
command to specify on the client the public key for the server to be
connected to guarantee the client can be connected to a reliable server.
System view