3com 4200G PWR 参照ガイド

3Com Switch 4200G Family

 

35

Command Reference

snmp-agent mib-view

Use the 

 command to create or update the view information, limiting the MIB objects 

to be accessed by the NMS.

snmp-agent packet max-size

Use the 

command to set the maximum size of SNMP packet that the Agent 

can send/receive.

snmp-agent sys-info

Use the 

command to configure system information such as geographical location of 

the device, contact information for system maintenance and version information of running SNMP.

snmp-agent target-host

Use the 

 command to command to configure destination of SNMP Trap packets.

snmp-agent trap enable

Use the 

 command to enable the device to send Trap packets.

snmp-agent trap life

Use the 

 command to set aging time for Trap packets.

snmp-agent trap queue-size

Use the 

 command to configure the information queue length of a Trap packet 

sent to the destination host.

snmp-agent trap source

Use the 

 command to configure the source address for sending Trap messages.

snmp-agent usm-user

Use the 

 command to add a new community name or, if you use the V3 parameter, 

a new user to an SNMP group.

snmp-agent usm-user

Use the 

 command to add a new user to an SNMP group. You can also optionally 

use this command to apply an ACL to filter network management users.

snmp-agent usm-user

Use the 

 command to add a new user to an SNMP group.

snmp-agent usm-user

Use the 

 command to add a new community name or, if you use the V3 parameter, 

a new user to an SNMP group.

snmp-host

Use the 

 command to configure an SNMP host for the member devices inside a cluster on the 

management device.

speed

Use the 

 command to set the transmission speed of the user interface.

speed

Use the 

 command to configure the port rate.

ssh client assign rsa-key

Use the 

 command to specify on the client the public key for the server to be 

connected to guarantee the client can be connected to a reliable server.