3com 5500-ei pwr Instruccion De Instalación

 

5-2 

[Sysname-luser-admin] service-type telnet level 3 

[Sysname-luser-admin] password simple admin 

3)  Establish an HTTP connection between your PC and the switch, as shown in 

. 

Figure 5-1 Establish an HTTP connection between your PC and the switch 

 

 

4)  Log in to the switch through IE. Launch IE on the Web-based network management terminal (your 

PC) and enter the IP address of the management VLAN interface of the switch in the address bar. 

(Make sure the route between the Web-based network management terminal and the switch is 

available.) 

5)  When the login authentication interface (as shown in 

) appears, enter the user name and 

the password configured in step 2 and click <Login> to bring up the main page of the Web-based 

network management system. 

Figure 5-2 The login page of the Web-based network management system 

 

 

If a login banner is configured with the header command, when a user logs in through Web, the banner 

page is displayed before the user login authentication page. The contents of the banner page are the 

login banner information configured with the header  command. Then, by clicking <Continue> on the 

banner page, the user can enter the user login authentication page, and enter the main page of the 

Web-based network management system after passing the authentication. If no login banner is 

configured by the header  command, a user logging in through Web directly enters the user login 

authentication page. 

Follow these steps to configure the login banner: 

Enter system view 

system-view 

— 

Configure the banner to be 
displayed when a user logs in 
through Web 

header login text 

Required 

By default, no login banner is 
configured.