3com 5500-ei pwr Guía De Referencia

 

1-4 

System view 

None 

Use the copyright-info enable command to enable copyright information displaying. 

Use the undo copyright-info enable command to disable copyright information displaying. 

By default, copyright information displaying is enabled. That is, the copyright information is displayed 

after a user logs into a switch successfully.  

Note that these two commands apply to users logging in through the console port and by means of 

Telnet. 

# Disable copyright information displaying. 

******************************************************************************** 

*  Copyright(c) 2004-2008 3Com Corp. and its licensors. All rights reserved.   * 

*  Without the owner's prior written consent,                                  * 

*  no decompiling or reverse-engineering shall be allowed.                     * 

******************************************************************************** 

 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] undo copyright-info enable 

# After the above configuration, no copyright information is displayed after a user logs in, as shown 

below.  

<Sysname> 

databits { 7 | 8 } 

AUX user interface view