3com 5500-ei pwr Guía De Referencia

 

1-6 

# Display the source IP address configured for the switch operating as the Telnet server.  

<Sysname> display telnet-server source-ip 

The source IP you specified is 192.168.1.1 

Any view 

None 

Use the display telnet source-ip command to display the source IP address configured for the switch 

operating as the Telnet client. That is, the source IP address of the Telnet service packets sent when the 

switch operates as the Telnet client to log in to the remote device. 

z 

If the source interface is specified for the switch, this command displays the IP address of the 

source interface. 

z 

If no source address or source IP interface is specified for the switch, 0.0.0.0 is displayed. That is, 

the source IP address of Telnet service packets is that of the outbound interface. 

# Display the source IP address configured for the switch operating as the Telnet client. 

<Sysname> display telnet source-ip 

The source IP you specified is 192.168.1.1 

display user-interface [ type number | number ] [ summary ] 

Any view 

type: User interface type, which can be AUX (for AUX user interface) and VTY (for VTY user interface). 

number: User interface index. A user interface index can be relative or absolute. 

z 

In relative user interface number scheme, the type argument is required. In this case, AUX user 

interfaces are numbered from AUX0 through AUX7; VTY user interfaces are numbered from VTY0 

through VTY4.