3com 5500-ei pwr Guía De Referencia
1-26
The source interface can be a loopback interface or a VLAN interface. If the specified interface does not
exist, the system prompts that this configuration fails, and the login succeeds only when there is a route
between the Telnet client and the specified source interface.
With the telnet-server source-interface command configured, the client can log in to the local device
using only the primary IP address of the specified interface.
Examples
# Specify VLAN-interface 2 as the source interface for the Telnet server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] telnet source-interface Vlan-interface 2
telnet-server source-ip
Syntax
telnet-server source-ip ip-address
undo telnet-server source-ip
View
System view
Parameters
ip-address: Source IP address to be set.
Description
Use the telnet-server source-ip command to specify the source Telnet server IP address.
Use the undo telnet-server source-ip command to remove the source Telnet server IP address.
With the telnet-server source-ip command configured, the client can log in to the local device using
the specified IP address only, and the login succeeds only when there is a route between the client and
specified source IP address.
z
If the specified IP address is not an address on the local switch, the system prompts configuration
failure.
z
If the specified IP address is a secondary IP address of a Layer 3 interface, a client can log in to the
switch using only the primary IP address of the interface.
Examples
# Specify the source IP address of the Telnet server as 192.168.1.1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] telnet-server source-ip 192.168.1.1