3com 7000 Manual Suplementario
ILMI ATM Addresses
161
Delete ATM Address
from Port
Deletes an ATM address from the list of ATM addresses that were
configured by LMA at a port. Specify the ATM address by its member ID.
For a list of addresses registered by LMA together with their member IDs,
“Display Static ATM Addresses at Port” on page 153.
configured by LMA at a port. Specify the ATM address by its member ID.
For a list of addresses registered by LMA together with their member IDs,
“Display Static ATM Addresses at Port” on page 153.
Perform the command Save ATM Addresses to Flash (“Save ATM
Addresses to Flash” on page 162) before the next reboot to ensure that
your changes are saved.
Addresses to Flash” on page 162) before the next reboot to ensure that
your changes are saved.
Only ATM addresses created by LMA can be deleted by this command.
Command Actions
Command Result
Example
Enter:
3 4 2 3 3202
The ATM address with member ID 3202 is deleted from the MIB at the
port <3.2>.
port <3.2>.
Enter the menu sequence:
(3) CON: Connections
(4) S&C: Setup and Config Conns
(2) STP: Atm address setup
(3) DEL: Delete ATM address
Enter a parameter at the prompt
Parameter
Format or Range
Member ID
“slot””port””0n”
Direct access sequence:
3 4 2 3
[parameters]
System action taken:
The specified ATM address is deleted from specified
port. The change is not saved in flash memory.
port. The change is not saved in flash memory.
System message display:
Information is displayed as shown in the example
below.
below.