3com 7000 Manual Suplementario
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
Display Virtual Channels at Port
173
Display Virtual
Channels at Port
Channels at Port
The following commands allow you to display the virtual channels
(connections) established at a port.
(connections) established at a port.
■
■
■
For information about establishing port connections, see “External Links – ATM Connections” on page 99 in the Operations Guide.
Display Virtual
Channel to IME
Address
Displays information about virtual channels established at a specific port.
Specify the virtual channel by specifying its VPI/VCI values. The virtual
channels were created dynamically (SVCs).
Specify the virtual channel by specifying its VPI/VCI values. The virtual
channels were created dynamically (SVCs).
Command Actions
Command Result
Enter the menu sequence:
(3) CON: Connections
(3) PRT: ATM ports
(1) IME: Conns of IME addresses
(3) PRT: ATM ports
(1) IME: Conns of IME addresses
Enter a parameter at the prompt
Parameter
Format or Range
Port ID
slot.port
VPI
A
for all VPI values
VCI
any value for all VPI values
Direct access sequence:
3 3 1
[parameters]
System action taken:
The connection information for the specified port is
displayed.
displayed.
System message display:
Information is displayed as shown in the example on
pages 174.
pages 174.