3com 7000 Manual Suplementario

Create Permanent Virtual Channel (PVC)

183

Create UBR PVC —

Quick Setup

Sets up UBR PVC call using the default for parameters not explicitly set.
Default values for Cell Loss Level, Priority, and Cell Loss Priority are used
(see Table 28). The same limits as full PVC call setup apply. For more
information, see “Permanent Virtual Channels” on page 100 in the Operations Guide.

Command Actions

Command Result

Example

Enter:

3 4 1 2 p2p 5.1 0 37 5.2 0 381

The following message is displayed:

A new PVC was created with call id: 9.

Enter the menu sequence:

(3) CON: Connections

(4) S&C: Setup and Config Conns

(1) PVC: PVC operations

(2) CRP: Create PVC call

Enter a parameter at the prompt

Parameter

Format or Range

Call type

P2P

for point-to-point PVC

P2M

for point-to-multipoint PVC

First port ID

slot.port

First port VPI

See (

3)CON\(4)S&C\(1)PVC

for VPI/VCI limits

First port VCI

See (

3)CON\(4)S&C\(1)PVC

for VPI/VCI limits

Second port ID

slot.port

Second port VPI

See (

3)CON\(4)S&C\(1)PVC

for VPI/VCI limits

Second port VCI

See (

3)CON\(4)S&C\(1)PVC

for VPI/VCI limits

Direct access sequence:

3 4 1 2

[parameters]

System action taken:

A PVC with the required parameters is created.

System message display:

A new PVC was created with call id: