3com 7000 Manual Suplementario
286
C
HAPTER
10: C
ONFIGURING
THE
LAN E
MULATION
C
ONFIGURATION
S
ERVICE
(LECS)
LECS Address
The following commands allow you to configure the resident LECS
address.
address.
■
■
Wait for three minutes after each LECS update operation before
rebooting the switch to allow the change to be stored in flash.
rebooting the switch to allow the change to be stored in flash.
Display Resident LECS
Address
Displays the address of the resident LECS.
Command Actions
Command Result
Example
Enter:
2 1 1
The information shown below is displayed. The first 13 bytes represent
the network prefix of the CoreBuilder 7000 family ATM switch while the
last 7 bytes represent the user part.
the network prefix of the CoreBuilder 7000 family ATM switch while the
last 7 bytes represent the user part.
Enter menu sequence:
(2) LEM: LAN Emulation
(1) LCS: LE Config Service
(1) LGA: Get resident LECS address
Direct access sequence:
2 1 1
System action taken:
The address of the resident LECS is displayed.
System message display:
Information is displayed as shown in the example
below.
below.
LECS ADDR is: 47.0.0.0.0.0.3c.0.0.a0.0.0.0.0.a0.3e.0.0.1.0
User part
Network prefix