3com 7000 Manual Suplementario
388
C
HAPTER
13: C
ONFIGURING
AND
M
ANAGING
PNNI (F
OR
THE
E
XTENDED
V
ERSION
O
NLY
)
Set Peer Group ID
Sets the Peer Group ID of the PNNI node. For more information on peer
groups, see “Organizing a Network Hierarchy” on page 71 in the Operations Guide.
groups, see “Organizing a Network Hierarchy” on page 71 in the Operations Guide.
Currently the peer group ID cannot be changed via this option. To change
the peer group ID, the ATM address network prefix and node level should
be changed. See “Set ATM Address” on page 385 and “Set Node Level”
on page 382 in this chapter for details on how to change these.
the peer group ID, the ATM address network prefix and node level should
be changed. See “Set ATM Address” on page 385 and “Set Node Level”
on page 382 in this chapter for details on how to change these.
Command Actions
Command Result
Example
Enter:
1 1 10 4 3 3 3 2
The following message is displayed:
Peer Group ID can only be changed via the Node Level and ATM
address network prefix.
Enter menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(3) CHR: Characteristics
(3) PID: Peer Group ID
(2) SPI: Set Peer Group ID
Direct access sequence:
1 1 10 4 3 3 3 2
System action taken:
None.
System message display:
Peer Group ID can only be changed via
the Node Level and ATM address network
prefix.