3com 7000 Manual Suplementario

Setting the Timers

407

Set CDV Proportional

Multiplier (%)

Sets the CDV proportional multiplier percentage. The CDV proportional
multiplier percentage is the percentage difference in the Cell Delay
Variation metrics from the last value advertised. A change to the CDV
proportional multiplier percentage value takes place after the next
reboot.

Command Actions

Command Result

Example

Enter:

1 1 10 4 3 4 11 15

The following message is displayed:

Default Value is 25, new value is 15

Press ENTER to continue...

Enter menu sequence:

(1) SYS: Platform config

(1) SET: Switch setup

(10) PNI: PNNI Setup

(4) CFP: Configure PNNI

(3) NCF: Node Configuration

(4) TIM: Timers

(11) CDV: CDV Proportional

Multiplier(%)

Enter a parameter at the prompt

Parameter

Format or Range

percentage

1 - 99%

Direct access sequence:

1 1 10 4 3 4 11

[parameters]

System action taken:

The CDV proportional multiplier is displayed and is
updated to its new value.

System message display:

Default value is <x>, new value is <y>