3com 140m Guía Del Usuario
Wall Mounting Your OfficeConnect Switch
2-7
Wall Mounting Your OfficeConnect Switch
There are two slots on the underside of your
OfficeConnect switch which are used for wall
mounting. You can mount the unit with the LEDs
facing upwards or downwards, to suit your needs.
OfficeConnect switch which are used for wall
mounting. You can mount the unit with the LEDs
facing upwards or downwards, to suit your needs.
When wall mounting the unit, ensure that it is within
reach of the power outlet.
reach of the power outlet.
You need two suitable screws. Ensure that the wall
you are going to use is smooth, flat, dry and sturdy.
Make two screw holes which are 142mm (5.6 inches)
apart. Use the arrows at the top of the Quick
Reference Guide to mark the position of the holes.
Fix the screws into the wall, leaving their heads 3mm
(0.12 inches) clear of the wall surface.
you are going to use is smooth, flat, dry and sturdy.
Make two screw holes which are 142mm (5.6 inches)
apart. Use the arrows at the top of the Quick
Reference Guide to mark the position of the holes.
Fix the screws into the wall, leaving their heads 3mm
(0.12 inches) clear of the wall surface.
Remove any connections to the unit and locate it over
the screw heads. When in line, gently push the unit
on to the wall and move it downwards to secure.
When making connections, be careful not to push the
unit up and off the wall.
the screw heads. When in line, gently push the unit
on to the wall and move it downwards to secure.
When making connections, be careful not to push the
unit up and off the wall.
CAUTION: Only wall mount single units, do not wall
mount stacked units.
mount stacked units.
Connecting Workstations and Other
Equipment to Your Switch
Equipment to Your Switch
WARNING: Ensure you have read the Important
Safety Information section carefully before you start.
Safety Information section carefully before you start.
ACHTUNG: Versichern Sie sich, daß Sie den
Abschnitt mit den wichtigen Sicherheitshinweisen
gelesen haben, bevor Sie das Gerät benutzen.
Abschnitt mit den wichtigen Sicherheitshinweisen
gelesen haben, bevor Sie das Gerät benutzen.
AVERTISSEMENT: Assurer que vous avez lu
soigneusement la section de L’information de Sécurité
Importante avant que vous commenciez.
soigneusement la section de L’information de Sécurité
Importante avant que vous commenciez.
CAUTION: Do not power the switch off and on
quickly. Wait about 5 seconds between power cycles.
quickly. Wait about 5 seconds between power cycles.
Connecting workstations and other equipment to
your switch is easy. Use 10BASE-T cables to connect
any 10BASE-T workstations to any of your switch’s
four 10BASE-T RJ45 ports. Use a 100BASE-TX cable to
connect a 100BASE-TX workstation to your switch’s
100BASE-TX RJ45 port.
your switch is easy. Use 10BASE-T cables to connect
any 10BASE-T workstations to any of your switch’s
four 10BASE-T RJ45 ports. Use a 100BASE-TX cable to
connect a 100BASE-TX workstation to your switch’s
100BASE-TX RJ45 port.
If you are using the 100BASE-TX port to connect a
workstation, ensure the MDI/MDIX switch is set to
MDIX (out).
workstation, ensure the MDI/MDIX switch is set to
MDIX (out).