3com S7906E Instruccion De Instalación
1-26
Task
Remarks
Required
Optional
Optional
Configuration Prerequisites
Before configuring IPv6 PIM-SSM, complete the following task:
z
Configure any IPv6 unicast routing protocol so that all devices in the domain are interoperable at
the network layer.
Before configuring IPv6 PIM-SSM, prepare the following data:
z
The IPv6 SSM group range
Enabling IPv6 PIM-SM
The SSM model is implemented based on some subsets of IPv6 PIM-SM. Therefore, a router is IPv6
PIM-SSM capable after you enable IPv6 PIM-SM on it.
When deploying an IPv6 PIM-SM domain, you are recommended to enable IPv6 PIM-SM on all
non-border interfaces of routers.
Follow these steps to enable IPv6 PIM-SSM:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enable IPv6 multicast routing
multicast ipv6 routing-enable
Required
Disable by default
Enter interface view
interface interface-type
interface-number
interface-number
—
Enable IPv6 PIM-SM
pim ipv6 sm
Required
Disabled by default
All the interfaces of the same device must work in the same IPv6 PIM mode.
For details about the multicast ipv6 routing-table command, see IPv6 Multicast Routing and
Forwarding Commands in the IP Multicast Volume.