3com S7906E 설치 설명서

 

1-26 

Task 

Remarks 

Enabling IPv6 PIM-SM 

Required 

Configuring the IPv6 SSM Group Range 

Optional 

Optional 

 

Before configuring IPv6 PIM-SSM, complete the following task:  

z 

Configure any IPv6 unicast routing protocol so that all devices in the domain are interoperable at 

the network layer. 

Before configuring IPv6 PIM-SSM, prepare the following data:  

z 

The IPv6 SSM group range 

The SSM model is implemented based on some subsets of IPv6 PIM-SM. Therefore, a router is IPv6 

PIM-SSM capable after you enable IPv6 PIM-SM on it.  

When deploying an IPv6 PIM-SM domain, you are recommended to enable IPv6 PIM-SM on all 

non-border interfaces of routers.  

Follow these steps to enable IPv6 PIM-SSM:  

To do... 

Use the command... 

Remarks 

Enter system view 

— 

Enable IPv6 multicast routing 

Required 

Disable by default  

Enter interface view 

interface interface-type 
interface-number 

— 

Enable IPv6 PIM-SM 

Required 

Disabled by default  

 

All the interfaces of the same device must work in the same IPv6 PIM mode.  

 

For details about the multicast ipv6 routing-table command, see IPv6 Multicast Routing and 

Forwarding Commands in the IP Multicast Volume.