3com S7906E Instruccion De Instalación
1-11
GE2/0/4
Vlan(id):10.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port.
GE2/0/1 (D)
IP group(s):the following ip group(s) match to one mac group.
IP group address:FF1E::101
(::, FF1E::101):
Host port(s):total 0 port.
MAC group(s):
MAC group address:3333-0000-0101
Host port(s):total 0 port.
As shown above, MLD Snooping is maintaining the router port in the IPv6 multicast VLAN (VLAN 10)
and the member ports in the sub-VLANs (VLAN 2 through VLAN 4).
Port-Based Multicast VLAN Configuration Example
Network requirements
z
, Router A connects to an IPv6 multicast source (Source) through
GigabitEthernet 2/0/1, and to Switch A through GigabitEthernet 2/0/2.
z
MLDv1 is required on Router A. MLDv1 Snooping is required on Switch A. Router A acts as the
MLD querier.
z
Switch A’s GigabitEthernet 2/0/1 belongs to VLAN 10, GigabitEthernet 2/0/2 through
GigabitEthernet 2/0/4 belong to VLAN 2 through VLAN 4 respectively, and Host A through Host C
are attached to GigabitEthernet 2/0/2 through GigabitEthernet 2/0/4 of Switch A.
z
The IPv6 multicast source sends IPv6 multicast data to IPv6 multicast group FF1E::101. Host A,
Host B, and Host C are receivers of the IPv6 multicast group.
z
Configure the port-based IPv6 multicast VLAN feature so that Router A just sends IPv6 multicast
data to Switch A through the IPv6 multicast VLAN and Switch A forward the IPv6 multicast data to
the receivers that belong to different user VLANs.