Инструкции По Установке для 3com S7906E

 

1-11 

            GE2/0/4 

  Vlan(id):10. 

    Total 1 IP Group(s). 

    Total 1 IP Source(s). 

    Total 1 MAC Group(s). 

    Router port(s):total 1 port. 

            GE2/0/1                (D) 

    IP group(s):the following ip group(s) match to one mac group. 

      IP group address:FF1E::101 

        (::, FF1E::101): 

          Host port(s):total 0 port. 

    MAC group(s): 

      MAC group address:3333-0000-0101 

          Host port(s):total 0 port. 

As shown above, MLD Snooping is maintaining the router port in the IPv6 multicast VLAN (VLAN 10) 

and the member ports in the sub-VLANs (VLAN 2 through VLAN 4).  

z 

As shown in 

, Router A connects to an IPv6 multicast source (Source) through 

GigabitEthernet 2/0/1, and to Switch A through GigabitEthernet 2/0/2.  

z 

MLDv1 is required on Router A. MLDv1 Snooping is required on Switch A. Router A acts as the 

MLD querier.  

z 

Switch A’s GigabitEthernet 2/0/1 belongs to VLAN 10, GigabitEthernet 2/0/2 through 

GigabitEthernet 2/0/4 belong to VLAN 2 through VLAN 4 respectively, and Host A through Host C 

are attached to GigabitEthernet 2/0/2 through GigabitEthernet 2/0/4 of Switch A.  

z 

The IPv6 multicast source sends IPv6 multicast data to IPv6 multicast group FF1E::101. Host A, 

Host B, and Host C are receivers of the IPv6 multicast group.  

z 

Configure the port-based IPv6 multicast VLAN feature so that Router A just sends IPv6 multicast 

data to Switch A through the IPv6 multicast VLAN and Switch A forward the IPv6 multicast data to 

the receivers that belong to different user VLANs.