3com S7906E Instruccion De Instalación

 

1-9 

To do... 

Use the command... 

Remarks 

Enter 
Ethernet 
port view 

interface interface-type 
interface-number 

Enter 
Layer-2 
aggregate 
interface 
view 

interface bridge-aggregation 
interface-number 

Enter 
Ethernet port 
view or port 
group view of 
a service 
provider-side 
port or ports 

Enter port 
group view 

port-group manual 
port-group-name 

Required 

Use either command. 

z 

Settings made in Ethernet 
interface view take effect only 
on the current port. 

z 

Settings made in Layer-2 
aggregate interface view take 
effect on the Layer-2 
aggregate interface and the 
member ports in the 
aggregation group 
corresponding to the Layer-2 
aggregate interface. 

z 

Settings made in port group 
view take effect on all ports in 
the port group. 

Configure the TPID in the 
service provider network 
VLAN tags 

qinq ethernet-type service-tag 
hex-value 

Optional 

0x8100 by default  

 

Following these steps to configure outer VLAN tag priority: 

Enter system view 

system-view 

— 

Create a class and enter class view

traffic classifier 
classifier-name [ operator 
{ and | or } ] 

Required 

By default, the keyword and 
is used.  

Configure to 
classify traffic 
based on inner 
VLAN 

if-match customer-vlan-id 
vlan-id-list  

Configure the 
matching 
criteria 

Configure to 
classify traffic 
based on inner 
VLAN tag priority

if-match customer-dot1p 
8021p-list 

Required  

Use either command. 

Quit to system view 

— 

Create a traffic behavior and enter 
traffic behavior view 

traffic behavior 
behavior-name 

Required 

Configure the action of marking 
traffic with the outer VLAN tag 
priority (that is, 802.1p priority) 

remark dot1p 8021p 

Required 

Quit to system view 

— 

Create a QoS policy and enter QoS 
policy view 

qos policy policy-name 

Required 

Associate the class with the traffic 
behavior configured above 

classifier classifier-name  
behavior behavior-name 

Required 

Quit to system view 

—