Инструкции По Установке для 3com S7906E
1-9
To do...
Use the command...
Remarks
Enter
Ethernet
port view
Ethernet
port view
interface interface-type
interface-number
interface-number
Enter
Layer-2
aggregate
interface
view
Layer-2
aggregate
interface
view
interface bridge-aggregation
interface-number
interface-number
Enter
Ethernet port
view or port
group view of
a service
provider-side
port or ports
Ethernet port
view or port
group view of
a service
provider-side
port or ports
Enter port
group view
group view
port-group manual
port-group-name
port-group-name
Required
Use either command.
z
Settings made in Ethernet
interface view take effect only
on the current port.
interface view take effect only
on the current port.
z
Settings made in Layer-2
aggregate interface view take
effect on the Layer-2
aggregate interface and the
member ports in the
aggregation group
corresponding to the Layer-2
aggregate interface.
aggregate interface view take
effect on the Layer-2
aggregate interface and the
member ports in the
aggregation group
corresponding to the Layer-2
aggregate interface.
z
Settings made in port group
view take effect on all ports in
the port group.
view take effect on all ports in
the port group.
Configure the TPID in the
service provider network
VLAN tags
service provider network
VLAN tags
qinq ethernet-type service-tag
hex-value
hex-value
Optional
0x8100 by default
Configure Outer VLAN Tag Priority
Following these steps to configure outer VLAN tag priority:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Create a class and enter class view
traffic classifier
classifier-name [ operator
{ and | or } ]
classifier-name [ operator
{ and | or } ]
Required
By default, the keyword and
is used.
is used.
Configure to
classify traffic
based on inner
VLAN
classify traffic
based on inner
VLAN
if-match customer-vlan-id
vlan-id-list
vlan-id-list
Configure the
matching
criteria
matching
criteria
Configure to
classify traffic
based on inner
VLAN tag priority
classify traffic
based on inner
VLAN tag priority
if-match customer-dot1p
8021p-list
8021p-list
Required
Use either command.
Quit to system view
quit
—
Create a traffic behavior and enter
traffic behavior view
traffic behavior view
traffic behavior
behavior-name
behavior-name
Required
Configure the action of marking
traffic with the outer VLAN tag
priority (that is, 802.1p priority)
traffic with the outer VLAN tag
priority (that is, 802.1p priority)
remark dot1p 8021p
Required
Quit to system view
quit
—
Create a QoS policy and enter QoS
policy view
policy view
qos policy policy-name
Required
Associate the class with the traffic
behavior configured above
behavior configured above
classifier classifier-name
behavior behavior-name
behavior behavior-name
Required
Quit to system view
quit
—