3com S7906E Instruccion De Instalación
1-17
z
If you switch the user privilege level without providing the level argument, the user privilege level will
be switched to level 3.
z
When the user logs in to the switch through the console port (AUX user interface), if local
authentication mode is applied for user privilege level switch, but the privilege level switch password
of the corresponding level is not configured, no password is required when the user switches to a
privilege level higher than the current one.
Modifying command level
All the commands in a view are defaulted to different levels, as shown in
. The administrator
can modify the command level based on users’ needs to make users of a lower level use commands
with a higher level or improve device security.
Follow these steps to modify the command level:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure the command level in
a specified view
a specified view
command-privilege level
level view view command
level view view command
Required
Refer to
default settings.
You are recommended to use the default command level or modify the command level under the
guidance of professional staff; otherwise, the change of command level may bring inconvenience to
your maintenance and operation, or even potential security problem.
Displaying and Maintaining Basic Configurations
To do…
Use the command…
Remarks
Display information on system
version
version
display version
Display information on the
system clock
system clock
display clock
Display defined command
aliases and the corresponding
commands
aliases and the corresponding
commands
display command-alias
Display information on terminal
users
users
display users [ all ]
Available in any view