Инструкции По Установке для 3com S7906E

 

1-17 

z 

If you switch the user privilege level without providing the level argument, the user privilege level will 

be switched to level 3. 

z 

When the user logs in to the switch through the console port (AUX user interface), if local 

authentication mode is applied for user privilege level switch, but the privilege level switch password 

of the corresponding level is not configured, no password is required when the user switches to a 

privilege level higher than the current one. 

 

All the commands in a view are defaulted to different levels, as shown in 

. The administrator 

can modify the command level based on users’ needs to make users of a lower level use commands 

with a higher level or improve device security. 

Follow these steps to modify the command level: 

Enter system view 

— 

Configure the command level in 
a specified view 

command-privilege level 
level view view command 

Required 

Refer to 

default settings. 

 

You are recommended to use the default command level or modify the command level under the 

guidance of professional staff; otherwise, the change of command level may bring inconvenience to 

your maintenance and operation, or even potential security problem. 

 

Display information on system 
version 

display version 

Display information on the 
system clock 

display clock 

Display defined command 
aliases and the corresponding 
commands 

Display information on terminal 
users 

display users [ all ] 

Available in any view