3com S7906E Instruccion De Instalación
1-9
Configuring an FTP Test
An FTP test is mainly used to test the connection between the NQA client and a specified FTP server
and the time necessary for the FTP client to transfer a file to or download a file from the FTP server.
Configuration prerequisites
Before an FTP test, you need to perform some configurations on the FTP server. For example, you
need to configure the username and password used to log onto the FTP server. For the FTP server
configuration, refer to File System Management Configuration in the System Volume.
Configuring an FTP test
Follow these steps to configure an FTP test:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter NQA test group view
nqa entry admin-name
operation-tag
operation-tag
—
Configure the test type as FTP
and enter test type view
and enter test type view
type ftp
Required
Configure the destination
address for a test operation
address for a test operation
destination ip ip-address
Required
By default, no destination IP
address is configured for a test
operation.
address is configured for a test
operation.
The destination IP address for a
test operation is the IP address of
the FTP server.
test operation is the IP address of
the FTP server.
Configure the source IP
address of a probe request
address of a probe request
source ip ip-address
Required
By default, no source IP address
is specified.
is specified.
The source IP address must be
that of an interface on the device
and the interface must be up.
Otherwise, the test will fail.
that of an interface on the device
and the interface must be up.
Otherwise, the test will fail.
Configure the operation type
operation { get | put }
Optional
By default, the operation type for
the FTP is get, that is, obtaining
files from the FTP server.
the FTP is get, that is, obtaining
files from the FTP server.
Configure a login username
username name
Required
By default, no login username is
configured.
configured.
Configure a login password
password password
Required
By default, no login password is
configured.
configured.
Specify a file to be transferred
between the FTP server and
the FTP client
between the FTP server and
the FTP client
filename file-name
Required
By default, no file is specified.
Configure common optional
parameters
parameters
Optional