3com S7906E 설치 설명서

 

1-9 

An FTP test is mainly used to test the connection between the NQA client and a specified FTP server 

and the time necessary for the FTP client to transfer a file to or download a file from the FTP server. 

Configuration prerequisites 

Before an FTP test, you need to perform some configurations on the FTP server. For example, you 

need to configure the username and password used to log onto the FTP server. For the FTP server 

configuration, refer to File System Management Configuration in the System Volume. 

Configuring an FTP test 

Follow these steps to configure an FTP test: 

Enter system view 

system-view 

— 

Enter NQA test group view 

nqa entry admin-name 
operation-tag 

— 

Configure the test type as FTP 
and enter test type view 

type ftp 

Required 

Configure the destination 
address for a test operation 

destination ip ip-address 

Required 

By default, no destination IP 
address is configured for a test 
operation. 

The destination IP address for a 
test operation is the IP address of 
the FTP server. 

Configure the source IP 
address of a probe request 

source ip ip-address 

Required 

By default, no source IP address 
is specified. 

The source IP address must be 
that of an interface on the device 
and the interface must be up. 
Otherwise, the test will fail. 

Configure the operation type 

operation { get | put } 

Optional 

By default, the operation type for 
the FTP is get, that is, obtaining 
files from the FTP server. 

Configure a login username 

username name 

Required 

By default, no login username is 
configured. 

Configure a login password 

password password 

Required 

By default, no login password is 
configured. 

Specify a file to be transferred 
between the FTP server and 
the FTP client 

filename file-name 

Required 

By default, no file is specified. 

Configure common optional 
parameters 

 

Optional