3com S7906E Guía De Referencia

 

1-7 

preference: BGP local preference, in the range 0 to 4294967295.  

Use the apply local-preference command to set the specified local preference for BGP routes.  

Use the undo apply local-preference command to remove the clause configuration.  

No local preference is set for BGP routing information by default.  

Related commands: route-policy.  

# Configure node 10 in permit mode of route policy policy1: If a route matches AS-PATH list 1, set a 

local preference of 130 for the route.  

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] if-match as-path 1 

[Sysname-route-policy] apply local-preference 130 

Route policy view 

2: System level 

None 

Use the apply mpls-label command to set MPLS labels for routing information.  

Use the undo apply mpls-label command to remove the clause configuration.  

No MPLS label is set for routing information by default.  

If MPLS labels failed to apply, the routing information can not be advertised. 

# Configure node 10 in permit mode of route policy policy1: If routing information matches AS-PATH list 

1, set MPLS labels for it.  

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] if-match as-path 1 

[Sysname-route-policy] apply mpls-label