3com S7906E Guía De Referencia

 

1-17 

None 

Use the if-match mpls-label command to specify the MPLS label match criterion.  

Use the undo if-match mpls-label command to remove the match criterion.  

The match criterion is not configured by default.  

# Configure node 10 in permit mode of route policy policy1 to match the MPLS labels of routing 

updates. 

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10  

[Sysname-route-policy] if-match mpls-label 

if-match route-type { internal | external-type1 | external-type2 | external-type1or2 | is-is-level-1 | 

is-is-level-2 | nssa-external-type1 | nssa-external-type2 | nssa-external-type1or2 } * 

undo if-match route-type [ internal | external-type1 | external-type2  |  external-type1or2 | 

is-is-level-1 | is-is-level-2 | nssa-external-type1 | nssa-external-type2 | nssa-external-type1or2 ] * 

Route policy view 

2: System level 

internal: Internal routes (OSPF intra-area and inter-area routes).  

external-type1: OSPF Type 1 external routes.  

external-type2: OSPF Type 2 external routes.  

external-type1or2: OSPF Type 1 or 2 external routes.  

is-is-level-1: IS-IS Level-1 routes.  

is-is-level-2: IS-IS Level-2 routes.  

nssa-external-type1: OSPF NSSA Type 1 external routes.  

nssa-external-type2: OSPF NSSA Type 2 external routes.  

nssa-external-type1or2: OSPF NSSA Type 1 or 2 external routes.  

Use the if-match route-type command to configure a route type match criterion.  

Use the undo if-match route-type command to remove the match criterion.  

The match criterion is not configured by default.