3com S7906E Guía De Referencia

 

1-8 

RPF Neighbor 

IP address of the RPF neighbor through which 
the multicast source is reachable  

Matched routing protocol 

If a protocol is configured, the multicast source 
address of the route should be the destination 
address of an entry in unicast routing table.  

Route-policy 

Routing policy. The multicast source address of 
the route should match the routing policy.  

Preference Route 

preference 

 

Order 

Sequence number of the route  

 

display multicast [  all-instance  | vpn-instance vpn-instance-name ] rpf-info  source-address 

[ group-address ] 

Any view 

1: Monitor level 

all-instance: Specifies all instances. 

vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive 

string of up to 31 characters and must not contain any space.. 

source-address: Multicast source address.  

group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.  

Use the display multicast rpf-info command to view the RPF information of a multicast source.  

Note that if neither all-instance nor vpn-instance is specified, this command displays the information 

on the public instance. 

Related commands: display multicast routing-table, display multicast forwarding-table.  

# View all the RPF information of multicast source 192.168.1.55 in the public network. 

<Sysname> display multicast rpf-info 192.168.1.55 

 RPF information about source 192.168.1.55: 

     VPN instance: public net 

     RPF interface: Vlan-interface1, RPF neighbor: 10.1.1.1 

     Referenced route/mask: 192.168.1.0/24 

     Referenced route type: igp