3com S7906E Guía De Referencia

 

1-23 

z 

If configured in Ethernet interface view or Layer 2 aggregate interface view, this feature takes effect 

only if the interface belongs to the specified VLAN.  

z 

If configured in port group view, this feature takes effect only on those ports in this port group that 

belong to the specified VLAN.  

Related commands: subvlan in Multicast VLAN Commands in the IP Multicast Volume. 

# Enable the static router port function on Ethernet 2/0/1 in VLAN 2.  

<Sysname> system-view 

[Sysname] interface ethernet 2/0/1 

[Sysname-Ethernet2/0/1] igmp-snooping static-router-port vlan 2 

igmp-snooping version version-number 

VLAN view 

2: System level 

version-number: IGMP snooping version, in the range of 2 to 3. 

Use the igmp-snooping version command to configure the IGMP Snooping version.  

Use the undo igmp-snooping version command to restore the default setting.  

By default, the IGMP Snooping version is 2.  

Note that:  

z 

This command can take effect only if IGMP Snooping is enabled in the VLAN.  

z 

This command does not take effect in a sub-VLAN of a multicast VLAN. 

Related commands: igmp-snooping enable;  subvlan in  Multicast VLAN Commands in the IP 

Multicast Volume. 

# Enable IGMP Snooping in VLAN 2, and set the IGMP Snooping version to version 3.  

<Sysname> system-view 

[Sysname] igmp-snooping 

[Sysname-igmp-snooping] quit 

[Sysname] vlan 2 

[Sysname-vlan2] igmp-snooping enable 

[Sysname-vlan2] igmp-snooping version 3