Manualsbrain.com
  1. Manuales
  2. Marcas
  3. 3com
  4. S7906E
  5. Guía De Referencia

3com S7906E Guía De Referencia

Descargar
Página de 2327
 
1-11 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the mld command to enter MLD view. 
Use the undo mld command to remove the configurations made in MLD view. 
Note that this command can take effect only after IPv6 multicast routing is enabled on the device. 
Related commands: mld enable;  multicast ipv6 routing-enable in IPv6 Multicast Routing and 
Forwarding Commands in the IP Multicast Volume. 
Examples 
# Enable IPv6 multicast routing and enter MLD view. 
<Sysname> system-view 
[Sysname] multicast ipv6 routing-enable 
[Sysname] mld 
[Sysname-mld] 
mld enable 
Syntax 
mld enable 
undo mld enable 
View 
Interface view  
Default Level 
2: System level 
Parameters 
None 
Description 
Use the mld enable command to enable MLD on the current interface. 
Use the undo mld enable command to disable MLD on the current interface. 
By default, MLD is disabled on the current interface. 
Note that: 
z 
This command can take effect only after IPv6 multicast routing is enabled on the device. 
z 
Other MLD configurations performed on the interface can take effect only after MLD is enabled on 
the interface. 
Related commands: mld;  multicast ipv6 routing-table in IPv6 Multicast Routing and Forwarding 
Commands in the IP Multicast Volume.