3com S7906E Guía De Referencia

 

1-2 

[Sysname] pim ipv6 

[Sysname-pim6] bsr-policy 2000 

c-bsr ipv6-address [ hash-length [ priority ] ] 

IPv6 PIM view 

2: System level 

ipv6-address: IPv6 address of the interface that is to act as a C-BSR.  

hash-length: Hash mask length, in the range of 0 to 128. If you do not include this keyword in your 

command, the corresponding global setting will be used.  

priority: Priority of the C-BSR, in the range of 0 to 255. If you do not include this keyword in your 

command, the corresponding global setting will be used. A larger value means a higher priority. 

Use the c-bsr command to configure the specified interface a C-BSR.  

Use the undo c-bsr command to remove the related C-BSR configuration.  

No C-BSR is configured by default. 

Note that IPv6 PIM-SM must be enabled on the interface to be configured as a C-BSR. 

Related commands: pim ipv6 sm, c-bsr hash-length, c-bsr priority, c-rp.  

# Configure the interface with an IPv6 address of 1101::1 as a C-BSR.  

<Sysname> system-view 

[Sysname] pim ipv6 

[Sysname-pim6] c-bsr 1101::1 

c-bsr hash-length hash-length 

IPv6 PIM view