3com S7906E Guía De Referencia

 

1-34 

peer-lsr-id: MPLS LSR ID of the peer. An LSR and its peer must use the same password. 

password: Password string, case sensitive. If you specify the plain keyword, it must be a string of 1 to 

16 characters in plain text. If you specify the cipher keyword, it can be either a string of 1 to 16 

characters in plain text or a string of 24 characters in cipher text. 

Use the md5-password command to enable LDP MD5 authentication and set the password, which 

must be the same as that configured on the peer. 

Use the undo md5-password command to disable LDP MD5 authentication. 

By default, LDP MD5 authentication is disabled. 

Changing the password will cause the sessions and all LSPs based on the sessions to be removed. 

This command takes effect only after MPLS LDP is enabled in the corresponding view. 

# Enable MD5 authentication for the public network LDP instance, setting the password display mode to 

plain text. 

<Sysname> system-view 

[Sysname] mpls ldp 

[Sysname-mpls-ldp] md5-password plain 3.3.3.3 beijingpass 

# Enable MD5 authentication for LDP instance vpn1, setting the password display mode to plain text. 

<Sysname> system-view 

[Sysname] mpls ldp vpn-instance vpn1 

[Sysname-mpls-ldp-vpn-instance-vpn1] md5-password plain 3.3.3.3 beijingpass 

System view, interface view 

2: System level 

None 

Use the mpls command in system view to enable MPLS globally and enter MPLS view. 

Use the undo mpls command in system view to disable MPLS globally. 

Use the mpls command in interface view to enable MPLS for the interface. 

Use the undo mpls command in interface view to disable MPLS for the interface.