3com S7906E Guía De Referencia

 

1-19 

  In interface      : Vlan-interface2 

  Encapsulation type: vlan 

  MTU               : 1500 

  Control word      : 1 

  Entry type        : send 

  Out VC label      : 8193 

  Tunnel ID         : 0x110002 

Table 1-19 display mpls l2vpn forwarding-info command output description 

In interface 

Incoming interface, which is bound to L2VPN 

MTU 

Maximum transmission unit 

Control word 

Whether control word is enabled. 0 means disabled, and 1 means enabled. 

Out VC label 

Outgoing VC label 

Tunnel ID 

ID of the public tunnel 

 

display mpls static-l2vc [ interface interface-type interface-number ] 

Any view 

1: Monitor level 

interface interface-type interface-number: Specifies a CE interface by its type and number. 

Use the display mpls static-l2vc command to display information about static VCs configured on the 

router. 

If you specify an interface, the command displays only information about static VCs configured on the 

CE interface. 

# Display information about all static VCs configured on the router. 

<Sysname> display mpls static-l2vc 

total connections:  1,  1 up,  0 down 

ce-intf         state destination     tr-label  rcv-label tnl-policy 

Vlan2            up    3.3.3.9         100       200       policy1