3com S7906E Guía De Referencia

 

1-1 

display dot1x [ sessions | statistics ] [ interface interface-list ] 

Any view 

1: Monitor level 

sessions: Displays 802.1X session information. 

statistics: Displays 802.1X statistics. 

interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The 

interface-list argument is in the format of interface-list = { interface-type  interface-number [ to 

interface-type  interface-number ] } & <1-10>, where interface-type represents the port type, 

interface-number represents the port number, and & <1-10> means that you can provide up to 10 port 

indexes/port index lists for this argument. The start port number must be smaller than the end number 

and the two ports must be of the same type. 

Use the display dot1x command to display information about 802.1X. 

If you specify neither the sessions keyword nor the statistics keyword, the command displays all 

information about 802.1X, including session information, statistics, and configurations. 

Related commands: reset dot1x statistics, dot1x, dot1x retry, dot1x max-user, dot1x port-control, dot1x 

port-method, dot1x timer. 

# Display all information about 802.1X. 

<Sysname> display dot1x 

Equipment 802.1X protocol is enabled 

CHAP authentication is enabled 

Proxy trap checker is disabled 

Proxy logoff checker is disabled 

EAD quick deploy is enabled 

 

Configuration: Transmit Period     30 s,  Handshake Period       15 s