3com S7906E Guía De Referencia

 

1-6 

Ethernet port view 

2: System level 

None 

Use the port-security authorization ignore command to configure a port to ignore the authorization 

information from the RADIUS server.  

Use the undo port-security port-mode ignore command to restore the default. 

By default, a port uses the authorization information from the RADIUS server. 

After a user passes RADIUS authentication, the RADIUS server performs authorization based on the 

authorization attributes configured for the user’s account. For example, it may assign a VLAN. 

Related commands: display port-security. 

# Configure port GigabitEthernet 2/0/1 to ignore the authorization information from the RADIUS server. 

<Sysname> system-view 

[Sysname] interface gigabitethernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] port-security authorization ignore 

undo port-security enable 

System view 

2: System level 

None 

Use the port-security enable command to enable port security.  

Use the undo port-security enable command to disable port security. 

By default, port security is disabled. 

Note that: 

1)  Port security cannot be enabled when 802.1X or MAC authentication is enabled globally.