3com S7906E Guía De Referencia

 

1-5 

2: System level 

vlan-interface-id: VLAN interface number, in the range of 1 to 4094. 

Use the interface vlan-interface command to create a VLAN interface and enter its view or enter the 

view of an existing VLAN interface.  

Before you can create the VLAN interface of a VLAN, create the VLAN first. 

Use the undo interface vlan-interface command to remove the specified VLAN interface. 

You can use the ip address command in VLAN interface view to configure an IP address for a VLAN 

interface to perform IP routing. 

Related commands: display interface Vlan-interface. 

# Create VLAN-interface 2. 

<Sysname> system-view 

[Sysname] vlan 2 

[Sysname-vlan2] quit 

[Sysname] interface vlan-interface 2 

[Sysname-Vlan-interface2] 

ip address ip-address { mask | mask-length } [ sub ] 

undo ip address [ ip-address { mask | mask-length } [ sub ] ] 

VLAN interface view 

2: System level 

ip-address: IP address to be assigned to the current VLAN interface, in dotted decimal format. 

mask: Subnet mask in dotted decimal notation. 

mask-length: Subnet mask length, the number of consecutive ones in the mask. The value range is 0 to 

32. 

sub: Indicates the address is a secondary IP address. 

Use the ip address command to assign an IP address and subnet mask to a VLAN interface.  

Use the undo ip address command to remove the IP address and subnet mask for a VLAN interface.