3com S7906E Guía De Referencia

 

1-18 

Send message? [Y/N]y 

<Sysname> 

 

*** 

*** 

***Message from vty0 to vty0 

*** 

hello 

       

<Sysname> 

service-type { ftp | lan-access | { ssh | telnet | terminal }* [ level level ] } 

undo service-type { ftp | lan-access | { ssh | telnet | terminal }* } 

Local user view 

2: System level 

ftp: Specifies the users to be of FTP type. 

lan-access: Specifies the users to be of LAN-access type, which normally means Ethernet users, such 

as 802.1x users. 

ssh: Specifies the users to be of SSH type. 

telnet: Specifies the users to be of Telnet type. 

terminal: Makes terminal services available to users logging in through the Console port. 

level level: Specifies the user level for Telnet users, Terminal users, or SSH users. The level argument 

ranges from 0 to 3 and defaults to 0. 

Use the service-type command to specify the login type and the corresponding available command 

level. 

Use the undo service-type command to cancel login type configuration. 

Commands fall into four command levels: visit, monitor, system, and manage, which are described as 

follows: 

z 

Visit level: Commands of this level are used to diagnose network and change the language mode 

of user interface, such as the ping, tracert. The Telnet command is also of this level. Commands 

of this level cannot be saved in configuration files. 

z 

Monitor level: Commands of this level are used to maintain the system, to debug service problems, 

and so on. The display and debugging command are of monitor level. Commands of this level 

cannot be saved in configuration files.