3com S7906E Guía De Referencia

 

1-9 

# Display the configuration from the line containing “user-interface” to the last line in the current 

validated configuration (the output information depends on the device model and the current 

configuration). 

<Sysname> display current-configuration | begin user-interface 

user-interface aux 0 

user-interface vty 0 4 

 authentication-mode none 

 user privilege level 3 

# 

return  

Any view 

1: Monitor level 

None 

Use the display diagnostic-information command to display or save the statistics of each module’s 

running status in the system. 

When the system is out of order, you need to collect a lot of information to locate the problem. At this 

time you can use the display diagnostic-information command to display or save the statistics of 

each module’s running status in the system. The display diagnostic-information command collects 

prompt information of the commands display clock, display version, display device, and display 

current-configuration. 

# Save the statistics of each module's running status in the system.  

<Sysname> display diagnostic-information 

Save or display diagnostic information (Y=save, N=display)?[Y/N]y 

Please input the file name(*.diag)[flash:/default.diag]:aa.diag 

Diagnostic information is outputting to flash:/aa.diag. 

Please wait... 

Save succeeded. 

You can view the content of the file aa.diag by executing the more.aa.diag command in user view, in 

combination of the <Page Up> and <Page Down> keys. 

# Display the statistics of each module's running status in the system. 

<Sysname> display diagnostic-information