3com S7906E Guía De Referencia

 

1-24 

date: Indicates the current system date and time, the format of which depends on the log host. 

no-year-date: Indicates the current system date and time (year exclusive). 

none: Indicates that no time stamp information is provided. 

Use the info-center timestamp loghost command to configure the time stamp format of the system 

information sent to the log host. 

Use the undo info-center timestamp loghost command to restore the default. 

By default, the time stamp format for system information sent to the log host is date. 

# Configure that the system information output to the log host does not include the year information. 

<Sysname> system-view 

[Sysname] info-center timestamp loghost no-year-date 

info-center trapbuffer [channel { channel-number | channel-name } | size buffersize ] * 

undo info-center trapbuffer [ channel | size ] 

System view 

2: System level 

size  buffersize: Specifies the maximum number of trap messages in a trap buffer, in the range 0 to 

1,024 with 256 as the default value. 

channel-number: Specifies a channel number, in the range 0 to 9. 

channel-name: Specifies a channel name, which could be a default name or a self-defined name. The 

user needs to specify a channel name first before using it as a self-defined channel name. For more 

information, refer to the info-center channel name command. 

Use the info-center trapbuffer command to enable information output to the trap buffer and set the 

corresponding parameters. 

Use the undo info-center trapbuffer command to disable information output to the trap buffer. 

By default, information output to the trap buffer is enabled with channel 3 (trapbuffer) as the default 

channel and a maximum buffer size of 256. 

Note that the info-center trapbuffer command takes effect only after the information center is enabled 

with the info-center enable command.