3com S7906E Guía De Referencia

 

1-28 

Note that:  

z 

The log information is displayed (using the terminal logging command) only after the monitoring 

of system information is enabled on the current terminal first (using the terminal monitor 

command). 

z 

The configuration of this command is valid for only the current connection between the terminal and 

the device. If a new connection is established, the display of log information on the terminal 

restores the default.  

# Disable the display of log information on the current terminal. 

<Sysname> undo terminal logging 

% Current terminal logging is off 

terminal monitor 

undo terminal monitor 

User view 

1: Monitor level 

None 

Use the terminal monitor command to enable the monitoring of system information on the current 

terminal. 

Use the undo terminal monitor command to disable the monitoring of system information on the 

current terminal. 

By default, monitoring of the system information on the console is enabled and that on the monitor 

terminal is disabled. 

Note that: 

z 

You need to configure the terminal monitor command before you can display the log, trap, and 

debugging information. 

z 

Configuration of the undo terminal monitor command automatically disables the monitoring of log, 

trap, and debugging information. 

z 

The configuration of this command is valid for only the current connection between the terminal and 

the device. If a new connection is established, the monitoring of system information on the terminal 

restores the default.  

# Enable the monitoring of system information on the current terminal.