3com S7906E Guía De Referencia
1-2
<Sysname> display vrrp
IPv4 Standby Information:
Run Method : VIRTUAL-MAC
Virtual IP Ping : Enable
Total number of virtual routers: 1
Interface VRID State Run Adver. Auth Virtual
Pri Time Type IP
---------------------------------------------------------------------
Vlan100 1 Master 100 1 NONE 10.10.10.2
# Display detailed information about all VRRP groups on the device.
<Sysname> display vrrp verbose
IPv4 Standby Information:
Run Method : VIRTUAL-MAC
Virtual IP Ping : Enable
Total number of virtual routers: 1
Interface : Vlan-interface100
VRID : 1 Adver. Timer : 1
Admin Status : UP State : Master
Config Pri : 100 Run Pri : 100
Preempt Mode : YES Delay Time : 0
Auth Type : NONE
Track IF : Vlan200 Pri Reduced : 10
Track Object : 1 Pri Reduced : 10
Track Object : 2 Switchover
Virtual IP : 10.10.10.2
Virtual MAC : 0000-5e00-0101
Master IP : 10.10.10.1
Table 1-1 display vrrp command output description
Field
Description
Run Method
Current VRRP running mode, real MAC or virtual MAC
Virtual IP Ping
Whether you can ping the virtual IP address of the VRRP group
Total number of virtual routers
Number of VRRP groups
Interface
Interface to which the VRRP group belongs
VRID
Serial number of the VRRP group
Adver. Timer
VRRP advertisement interval
Admin Status
Administrative state: UP or DOWN
State
Status of the switch in the VRRP group, master, backup, or
initialize
initialize
Config Pri
Configured priority
Run Pri
Running priority
Preempt Mode
Preemptive mode
Delay Time
Preemption delay
Auth Type
Authentication type