3com S7906E Guía De Referencia

1-16

display vrrp ipv6 statistics

Syntax

display vrrp ipv6 statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ]

View

Any view

Default Level

1: Monitor level

Parameters

interface interface-type interface-number: Displays VRRP statistics information of the specified

interface. interface-type interface-number specifies an interface by its type and number.

vrid virtual-router-id: Displays statistics information of the specified VRRP group. virtual-router-id

specifies a VRRP group by its group number, in the range 1 to 255.

Description

Use the display vrrp ipv6 statistics command to display statistics about VRRP for IPv6.

If you specify both an interface and a VRRP group, only the statistics about the specified VRRP group

are displayed; if you only specify an interface, the statistics about all the VRRP groups on the interface

are displayed; if you specify neither, the statistics about all the VRRP groups on the device are

displayed.

Examples

# Display the statistics about all VRRP groups for IPv6.

<Sysname> display vrrp ipv6 statistics

Interface : Vlan-interface100

VRID : 80

CheckSum Errors : 0 Version Errors : 0

Invalid Type Pkts Rcvd : 0 Advertisement Interval Errors : 0

Hop Limit Errors : 0 Auth Failures : 0

Invalid Auth Type : 0 Auth Type Mismatch : 0

Packet Length Errors : 0 Address List Errors : 0

Become Master : 1 Priority Zero Pkts Rcvd : 0

Advertise Rcvd : 0 Priority Zero Pkts Sent : 0

Advertise Sent : 20

Interface : Vlan-interface200