3com S7906E Guía De Referencia

 

1-2 

        Number of GVRP Frames Received          : 0 

        Number of GVRP Frames Transmitted       : 0 

        Number of Frames Discarded              : 0 

display garp timer [ interface interface-list ] 

Any view 

1: Monitor level 

interface interface-list: Defines one or multiple Ethernet ports. You can provide up to 10 Ethernet port 

lists, by each of which you can specify an individual port in the form of interface-type interface-number, 

or a port range in the form of interface-type interface-number1  to  interface-type interface-number2, 

where the end-port number specified by interface-number2 must be greater than the start-port number 

specified by interface-number1. If no ports are specified, this command displays the GARP timer 

settings on all ports. 

Use the display garp timer command to display GARP timer settings of specific ports.  

Note that: 

z 

If the interface interface-list keyword-argument combination is not specified, this command 

displays the GARP timer settings of all the ports.  

z 

If the interface interface-list keyword-argument combination is specified, this command displays 

the GARP timer settings of the specified ports.  

Related commands: garp timer, garp timer leaveall. 

# Display GARP timers on port GigabitEthernet 2/0/1.  

<Sysname> display garp timer interface GigabitEthernet 2/0/1 

        GARP timers on port GigabitEthernet2/0/1 

 

                Garp Join Time          : 20 centiseconds 

                Garp Leave Time         : 60 centiseconds 

                Garp LeaveAll Time      : 1000 centiseconds 

                Garp Hold Time          : 10 centiseconds 

garp timer { hold | join | leave } timer-value