3com S7906E Guía De Referencia

 

1-16 

oam mode { active | passive } 

Ethernet port view 

2: System level 

active: Specifies the active Ethernet OAM mode. 

passive: Specifies the passive Ethernet OAM mode. 

Use the oam mode command to set the Ethernet OAM operating mode for an Ethernet port. By default, 

an Ethernet OAM-enabled Ethernet port operates in the active Ethernet OAM mode.  

Note that: 

z 

No Ethernet OAM connection can be established between two Ethernet ports operating in the 

passive Ethernet OAM mode.  

z 

For an Ethernet OAM-enabled Ethernet port, the Ethernet OAM operating mode cannot be 

changed. To do this, you need to disable Ethernet OAM on the port first. 

Related commands: oam enable. 

# Configure GigabitEthernet 2/0/1 to operate in the active Ethernet OAM mode.  

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] oam mode active 

reset oam [ interface interface-type interface-number ] 

User view 

2: System level 

interface interface-type interface-number: Specifies a port by its type and number.