3com S7906E Guía De Referencia

 

1-6 

Reply from 0010-FC00-6512: sequence number=1101-43406  

Reply from 0010-FC00-6512: sequence number=1101-43407  

Reply from 0010-FC00-6512: sequence number=1101-43408  

Send:5        Received:5        Lost:0 

Table 1-3 cfd loopback command output description 

Loopback to mac-address with the sequence 
number start from sequence-number 

Sends LBMs to mac-address with the sequence 
number starting with sequence-number 

Reply from mac-address Reply 

from 

mac-address 

sequence number 

Sequence number in the LBR messages 

Send 

Number of LBMs sent 

Received 

Number of LBR messages received 

Lost 

Number of lost LBMs 

 

cfd ma ma-name md md-name vlan vlan-id 

undo cfd ma ma-name md md-name 

System view 

2: System level 

ma-name: Name of the MA, a string of 1 to 48 characters, composed of letters, numbers or underlines, 

but cannot start with an underline character. 

md  md-name: Specifies the name of an MD, a string of 1 to 48 characters, composed of letters, 

numbers or underlines, but cannot start with an underline character. 

vlan vlan-id: Specifies the ID of the VLAN where MA is in service, ranging from 1 to 4094. 

Use the cfd ma command to create MA(s) in an MD. 

Use the undo cfd ma command to delete specified MA in an MD. 

By default, no MA is created. 

Note that: 

z 

Before creating an MA, you must create an MD first. 

z 

When deleting an MA, you will also delete the configurations related to that MA. 

Related commands: cfd md.