Manualsbrain.com
  1. Manuales
  2. Marcas
  3. 3com
  4. S7906E
  5. Guía De Referencia

3com S7906E Guía De Referencia

Descargar
Página de 2327
 
1-12 
region-name 
Syntax 
region-name name 
undo region-name 
View 
MST region view 
Default Level 
2: System level 
Parameters 
name: MST region name, a string of 1 to 32 characters.  
Description 
Use the region-name command to configure the MST region name of your device.  
Use the undo region-name command to restore the default MST region name.  
By default, the MST region name of a device is its MAC address.  
The MST region name, the VLAN-to-MSTI mapping table and the MSTP revision level of a device jointly 
determine the MST region the device belongs to. 
Related commands: instance, revision-level, check region-configuration, vlan-mapping modulo, 
active region-configuration.  
Examples 
# Set the MST region name of the device to “hello”.  
<Sysname> system-view 
[Sysname] stp region-configuration 
[Sysname-mst-region] region-name hello 
reset stp 
Syntax 
reset stp [ interface interface-list ] 
View 
User view 
Default Level 
1: Monitor level 
Parameters 
interface  interface-list: Specifies an Ethernet port list, in the format of interface-list = { interface-type 
interface-number [ to  interface-type interface-number ] }&<1-10>, where &<1-10> indicates that you 
can specify up to 10 ports or port ranges.