3com S7906E Guía De Referencia

 

1-28 

# Configure the host to acquire information other than IPv6 address through stateless 

autoconfiguration. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] undo ipv6 nd autoconfig other-flag 

ipv6 nd dad attempts value 

Interface view 

2: System level 

value: Number of attempts to send an NS message for DAD, in the range of 0 to 600. The default value 

is “1”. When it is set to 0, DAD is disabled. 

Use the ipv6 nd dad attempts command to configure the number of attempts to send an NS message 

for DAD. 

Use the undo ipv6 nd dad attempts command to restore the default. 

By default, the number of attempts to send an NS message for DAD is 1. 

# Set the number of attempts to send an NS message for DAD to 20. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] ipv6 nd dad attempts 20 

ipv6 nd hop-limit value 

System view 

2: System level