3com S7906E Guía De Referencia

20090615-C-1.01

 

Release 6300 series 

The IP Routing Volume is organized as follows: 

IP Routing Table 
Display 

This document introduces the Display commands for IP Routing Table. 

Static Routing 

This document introduces the commands for Static Routing. 

RIP 

Routing Information Protocol (RIP) is a simple Interior Gateway Protocol 
(IGP), mainly used in small-sized networks.  This document introduces 
the commands for RIP configuration. 

OSPF 

Open Shortest Path First (OSPF) is an Interior Gateway Protocol based 
on the link state developed by IETF. This document introduces the 
commands for OSPF configuration. 

IS-IS 

Intermediate System-to-Intermediate System (IS-IS) is a link state 
protocol, which uses the shortest path first (SPF) algorithm. This 
document introduces the commands for IS-IS configuration. 

BGP 

Border gateway protocol (BGP) is an inter-autonomous system (inter-AS) 
dynamic route discovery protocol. This document introduces the 
commands for BGP configuration. 

IPv6 Static Routing 

Similar to IPv4 static routes, IPv6 static routes work well in simple IPv6 
network environments. This document introduces the commands for IPv6 
Static Routing configuration. 

IPv6 RIPng 

RIP next generation (RIPng) is an extension of RIP-2 for IPv4. RIPng for 
IPv6 is IPv6 RIPng. This document introduces the commands for RIPng 
configuration.  

IPv6 OSPFv3 

OSPFv3 is OSPF version 3 for short, supporting IPv6 and compliant with 
RFC2740 (OSPF for IPv6). This document introduces the commands for 
OSPFv3 configuration. 

IPv6 IS-IS 

IS-IS with IPv6 support is called IPv6 IS-IS dynamic routing protocol. This 
document introduces the commands for IPv6 IS-IS configuration. 

IPv6 BGP 

To support multiple network layer protocols, IETF extended BGP-4 by 
introducing IPv6 BGP. This document introduces the commands for IPv6 
BGP configuration.